Bluetooth 4.0 interface
Compatible with Android, Windows 7, 8, 10, IOS, MacOS, Linux.
Available in 2 versions:
This version has an on-board battery charger powered by an on-board
Mini-USB "power-only" connector. It is designed to run with an external
Lithium-Polymer or other rechargeable battery pack.
This version has a CR2032 battery holder on board (rear of board). It
does not have the battery charger circuit nor USB connector.
36 connections arranged in an open pin-header format allowing multiple
varieties of standard connector to be used.
Connections can be assigned as:
- Keyboard key
- Gamepad Button
- Gamepad analog axis with or without auto-calibration and center
- Gamepad POV Hat.
- Mouse button (including double-click)
- Quadrature Mouse Pair. X or Y axis. Normal or reverse direction.
- Quadrature left/right button presses.
- PC-controlled LED output using special software
- PC Num/Scroll/Caps lock LEDs
- Blue-HID locally-controlled LED output based on the state of any
- Logic level output (20ma max)
- Power-saving modes which are the most advanced in their class.
Not only does the board enter a progressive low-power state but it also
sets connected devices to low power states.
- No special drivers or application changes needed except for
PC-controlled LEDs which has an API with code examples.
- Simple open pin-header connectors allow use of separate or
composite modular wiring harnesses.
- U-Config configuration utility allows the connections to be
configured for each device type, and keycodes and other attributes set.
- Configuration information is sent “over-the-air” from
a PC equipped with a standard Bluetooth interface.
- Switches handled by super-fast logic using an individual
de-bounce state counter for each input giving ultimate performance for
- No key ghosting or blocking ever.
- Advanced keycode/button programming with in-built shift feature.
Includes macro capability
- 12-bit analog axis support
- Configuration utiity interacts real-time with the board and all
settings stored instantly in Flash ROM on the board.
- Optional CR2032 battery holder. Or Optional USB power connector
and on-board charging circuit for external battery.
- Single Mini-USB connector for PC (or MAC) connection. No separate
- 36 Truly independent inputs allow all switches to be commoned to
ground. No matrix or diodes
- Modular 8-way + ground harnesses available.
- Extended switch harnesses available.
- ESD protected inputs. Vital for high-footfall public applications.
- All settings stored in Flash ROM and retained after power-off.
- Configuration can be changed on-the-fly using a command-line. The
board can assume a completely different layout instantly.
Key and Button functions can have one primary and one secondary code
Secondary assignments are invoked by first activating a “Blue-HID
Any connection can be assigned as a shift.
Unique separately-programmable “button down” and
“button up” events allow use of all types of
normally-closed, normally-open, or active high/low controls.
“Button down” and “button up” can be separately
assigned as primary or secondary codes.
Controls can be assigned as “normal” or
Toggle (push on-push off) and flip-flop modes available.
Programmable analog offset and scale factor for all analog axes.
X and Y axes can be configured with adjustable center dead-zone and
Extended macro capability.
User-upgradeable firmware for future enhancements and customizations.
Examples of control types which can be connected:
- Switch-type joysticks
- Toggle switches
- Toggle switches with integral LED (does not require a second
connection for the LED)
- Momentary pushbuttons with integral LED (LED can be controlled
without any host application, or can be host-controlled)
- LEDs associated with a switch. (LED can be controlled without any
- LED indicators driven by a PC application.
- Other devices can be controlled either directly or via an
external high-current driver
- Analog joysticks
- Incremental Rotary encoders (Spinners).
- Low-resolution rotary encoders (360 degree volume control type)
- 12-way or N-way rotary switches used as encoders (requires simple
- Optical steering wheels
- Pot-type steering wheels
- Pot-type throttle pedals
- Analog Voltage sources (0-5 volts).
- TTL logic signals.
Control counts which can be configured:
Total 36 connection pins.
Max 6 analog axes on 36 possible pins.
Max 32 Gamepad buttons.
Max 3 Quadrature mouse axes (X, Y and Z)
Max 36 keyboard keys on 36 possible pins.
Max 16 LEDs in any combination of PC or Blue-HID controlled.
Max 36 low-current output drivers.