BlueHID Brings wireless Bluetooth connectivity to the Universal Human Interface Device. Unique driver-free Input and Output features now without wires!... [Read More...]
U-HID Board Overview
BlueHID Board Overview
U-CONFIG Utility
U-HID Nano
Harness Options
Gamepad Buttons
Mouse Buttons
Keyboard Switch
Analog Input
Encoder Devices
U-HID Controlled LED
PC-Controlled LED
Power and Ground
U-HID Shift Feature
Self-Test LED
USB Output Drivers
USB Input Devices
Power and Ground

You can assign any connection as power output (+5V) or ground.
You need to be aware of the following limitations:

  • Power and ground pins can only source/sink 30mA max current per pin.

  • Total current draw must not exceed 500mA

If you need more current than 30mA then you can use one of the fixed power pins on connector J7. See the U-Config program board image for details of which pins these are. In fact it is good practice to use these pins whenever possible for a 5 volt source as they are powered directly from the USB supply.
Using assigned pins instead offers advantages of modular connectors and is particularly useful for optical devices which always need a supply for the optical switches and dont have a large current requirement. As each modular plug has one fixed ground connection you would rarely need to assign a ground pin.

  Réalisation :   |   Contact :
Copyright u-hid (c) 2008